Specializing in the production of supply high quality glass fiber bar, carbon fiber tube etc.
Main features
Raw materials and their applications: glass fiber than organic fiber, high temperature resistant
non-combustible, corrosion resistance, good heat insulation, sound insulation, high tensile strength,
good electric insulation.But sex is crisp, poor wear resistance.Used to make reinforced plastic (see image)
or enhance rubber, glass fiber as reinforcing material has the following characteristics, these
characteristics make the use of the glass fiber is far more than other types of fibers widely, the
development speed also leads the characteristics listed below:
1) High tensile strength, elongation is small (3%).
2 ) High elasticity coefficient, excellent rigidity.
3) Within the elastic limit of large amount of elongation and tensile strength is high, therefore, absorb
the impact energy.
4) For inorganic fiber, incombustible, good chemical resistance.
Introduction
Glass tube is made of glass fibre after dipping epoxy resin, the winding, curing, manufacturing can be
used in different solutions to winding glass fibers, to meet the requirements for different USES and
strength.Its USES include high voltage insulators, fuse tube, bush for high voltage electrical equipment,
railway bushing, and high pressure bottle, etc.Other names: ring oxygen glass fiber winding tubes,
winding pipe, epoxy tubes, glass fiber winding tubes, glass tube, the fuse tube, bush for high voltage
electrical equipment, high pressure bottle epoxy winding pipe.
Test standard
Glass fiber high tensile strength, elongation small (3%), the test method standard: GB/T14338-1993
synthetic staple crimp test method of GB/T 15232-1994 textile glass fiber mat on the determination of
tensile breaking strength, 7689.5 GB/glass fiber is the determination of tensile breaking strength and
breaking elongation, GB T15232-1994 textile glass fiber mat on the determination of tensile breaking
strength, GB/T 7689.5 2001 | woven fabric reinforced material test method for part 5: determination of the
glass fiber tensile breaking strength and breaking elongation, and so on.Single fiber strength and
performance test will be adopted to test glass fiber with high strength and high modulus fibers strength
meter.
Specification
| The serial number | The index name | Unit | Parameter values |
| 1 | The density of | g/cm3 | 1. 8—1.9 |
| 2 | Axial cross-sectional tensile strength | Mpa | 180—300 |
| 3 | Perpendicular to the wall layer of resistance to voltage | Mpa | 150—200 |
| 4 | The axial voltage withstand | Mpa | 100—200 |
| 5 | Bibulous rate | % | <0.5 |
| 6 | Zinc chloride content | Ω | ≧1.0×106 |
Display
Product Tags:
|
|
Light weight glass fiber / carbon fiber tube for Electronics industry insulation Images
|
